This home owner in North Granby, CT called us out to give him a full energy evaluation. While we were going through the home on our inspection, we noticed that he had his HV/AC system in his attic. Though it seems like a good spot to put these large systems, it might be the worst place possible. These systems are in an attic which can have a temperature from 140 degrees in the summer to 10 degrees in the winter! When you are trying to get hot air into your home to heat it from this system in the winter, it has to work extremely hard to fight the frigid temperatures to run. Then, the hot air it produces goes into a sheet metal duct that is like a freezer—making the hot air it just made cold by the time it gets into your living space! That is why the system can never stop running making it a very expensive problem. To fix this, we first put our 2 inch Silverglo EPS foam board with a reflective barrier on top of the duct. Then on the sides and the bottom, we sprayed the ducts with 2-part closed cell spray foam. This will help protect the system in the extreme climates it can face. Now that this system is protected, it will not run nearly as much—saving the home owner money and helping his family stay warm!