Removing and Replacing Insulation in an Attic in Ellington, CT

This customer in Ellington, CT called us out because of a concern they were having in their home. Their concern was that they had very old, ineffective fiberglass insulation in the attic. Fiberglass insulation is super fluffy, and is not able to properly insulate a home on its own. Due to this, this home was way colder than it should be this winter. This was caused by the lack of proper insulation. Without proper insulation air can leak into your attic and out of your home, making it difficult and costly to keep a home warm.

To fix this, we use our SuperPlatform treatment. First we need to remove the existing insulation.  Our installers remove all of the old insulation, bag it up, and properly dispose of the materials. Since this home contains an HVAC system in their attic we have make sure there is a proper walkway, or catwalk in the attic. This makes it so that service can be done correctly and safely in a space where there are mechanics.  Next, we lay our 4" SilverGlo foam board across the wooded walkway. This will increase the insulation value by 24%. We want to make sure that none of the blown in insulation we are installing will get on to our new walkway. Next, we have to install plywood over the foam board held in place by long screws and washers. Following this step, we dense pack TruSoft cellulose insulation into any space beneath the catwalk that is not filled.

Thanks to Dr. Energy Saver by Eco Energy Solutions, this customer is warmer and ecstatic with the temperature in their home!