Sandisfield, MA's Dependable Insulation and Mold Removal Contractor!

This homeowner in Sandisfield, MA called us after purchasing his home. He had gone into the basement and noticed that there was a large mold issue. High relative humidity in a basement will cause mold to grow on the surfaces of framing lumber, sub floors, insulation, and everywhere. Spores are the airborne seeds of mold, which are produced when the mold is growing and active. These spores float on airstreams up from the crawl space into the living space, and people with sensitivities can react to them. When we fix a basement properly, the basement will dry out enough so mold will not continue to grow. But what can be done to treat and eliminate the mold that’s already there?

The answer is simple. Fogarty's Home Services utilizes Mold-X2 Cleaner and Mold-X2 Botanical in order to fight off the mold. Mold-X2 Cleaner effectively eliminates mold and mildew stains on contact. It is non-abrasive and non-flammable, and is sprayed on effected areas. Once Mold-X2 Cleaner is applied, mold disappears instantly, leaving wood surface looking nearly new. Mold-X2 Botanical, a plant-based disinfectant with a pleasant, temporary scent, is sprayed or fogged on surfaces, which prevents mold from growing back. Results – The mold is eliminated, with no odors or potential for wood rot. The basement is now ready for a permanent repair to the issues causing the high humidity. 

This homeowner in Sandisfield, MA called us when he noticed that there was a huge mold problem in his crawlspace. High relative humidity in a crawl space will cause mold to grow on the surfaces of framing lumber, sub floors, insulation, and everywhere. Spores are the airborne seeds of mold, which are produced when the mold is growing and active. These spores float on airstreams up from the crawl space into the living space, and people with sensitivities can react to them. When we fix a crawl space properly, the crawl space will dry out enough so mold will not continue to grow. But what can be done to treat and eliminate the mold that’s already there?

Fogarty's Home Services had the perfect solution for this customer. Mold-X2 Cleaner effectively eliminates mold and mildew stains on contact. It is non-abrasive and non-flammable, and is sprayed on effected areas. There is a temporary odor from the product, so we recommend that homeowners leave the house for a few hours, depending on how well the space can be ventilated. Once Mold-X2 Cleaner is applied, mold disappears instantly, leaving wood surface looking nearly new. Mold-X2 Botanical, a plant-based disinfectant with a pleasant, temporary scent, is sprayed or fogged on surfaces, which prevents mold from growing back. Now your crawl space is ready for other  solutions. Results – The mold is eliminated, with no odors or potential for wood rot. Your crawl space is now ready for a permanent repair to keep humidity low.

This homeowner in Sandisfield, MA called us hoping to get new attic insulation for a home they had recently purchased. When our Home Comfort Specialist arrived in the home, he noted that they needed completely new insulation, as their insulation was inefficient. Since attics are vented, we should think of them thermally as outside in the winter. In summer because of the suns radiant heat, they are much worse than outside, reaching 130˚ on summer days. Clearly, we need to keep an absolute boundary between our living space and the attic so inside air doesn’t move to the attic in the heating season (convection), and heat doesn’t pass up through our ceilings in winter (conduction), and down from our ceilings in the hot summer (conduction, radiation). To reduce overall air leakage, the attic is the first priority because warm air rises to the top of the house and finds any and all holes to leak out into the cold vented attic and is lost. Holes, gaps and joints include between drywall and framing at the top of walls, around pipes, wires, electric boxes, fixtures, duct, penetrations, ceiling grilles and joints in framing. And the only reason cold air leaks in from the outside at the lower levels of the house, is that warm air leaked out of the top and created a suction at the bottom. Attics are dramatically under-insulated compared to today’s standards. Result - cold drafty rooms downstairs, colder floors, house is harder to heat and keep comfortable, higher fuel and electric bills.

Fogarty's Home Services provided a very simple solution for this homeowner. Our attic insulation service is our most popular service -- and for good reason. Adding insulation in an attic without sealing all air leaks first should never be done, because you are burying air leaks and making them impossible to seal later - and insulation DOES NOT STOP air leaks. That’s why we first carefully air seal the many various points where air from the home leaks up into the attic and is lost. We use expanding foam, boards, caulk, and metal flashing and fire caulk around any masonry or metal chimney as appropriate. If necessary, baffles (air chutes) are installed in each rafter bay to keep soffit vents clear and prepare for insulation. Finally, our premium TruSoft™ cellulose insulation is blown to the optimum R-value (typically R60). TruSoft™ will not burn, get moldy, or attract pests. Blown insulation fills all gaps and odd shaped voids, and by filling over framing members, “thermal bridging” is avoided. Results - a warmer, more comfortable, less drafty house that you’ll notice everywhere - even downstairs! House is quieter. Fuel and electric bills are lower.

This homeowner in Sandisfield, MA called us requesting a comprehensive energy audit in her home. When we arrived at the home, our Home Comfort Specialist noted that she had insufficient attic insulation -- including parts of the attic that were not insulated. This presents an issue -- vented attics are hostile places - 30˚F in winter and 125˚F in the summer. They are very bad places to store things, and the worst place to locate ducts because they are the extreme opposite temperature as the air in the ducts that you paid to heat or cool. The attic floor (your ceilings), allow air from inside the house to leak into the attic where it is lost. For each cubic foot of air that leaks out, a cubic foot of air from the outside enters the bottom of the house, making your lower levels cold and drafty. Heat from the house in the attic melts snow on the roof where it refreezes at the eaves causing destructive ice damming. In the summer, the sun heats your roof to 160˚F, which radiates to the attic and then to your ceilings and rooms. Results - Major heat loss to the attic from house and ducts in winter, and heat gain in summer, uncomfortable rooms, more drafts upstairs and downstairs, higher fuel/electric bills.

Fogarty's Home Services was able to help this homeowner with her insulation problem. We utilized our SuperAttic™ advanced conversion system. SilverGlo™ EPS foam insulation board with graphite is installed on the underside of your roof deck. The graphite gives it superior R-value and a foil face on both sides reflects heat out in summer and back in during winter. The roof is still vented, kept cold in winter to prevent ice damming. In summer, excess heat is vented out. No harsh chemicals are sprayed in your home, like spray foam. The attic is now part of the conditioned space in your home, and ducts in the attic are no longer in a hostile environment. Your attic is clean, less dusty and suitable for storage. You can even finish your attic! Results - Your home is less drafty, warmer in winter and cooler in summer, lower fuel and electric bills, less dust.