Adding an Egress Window in Otis, MA
Challenge
This homeowner had several reasons for needing a window in his basement. For one, he needed an extra way for his family to exit the basement in case of a fire. This was required in order to make that specific room a bedroom, since there must be two modes of egress (exit). He also was concerned with making sure there was enough natural light in the space. Since this is a basement, and the home is not on a hill, there was not an ideal place to put a window. The homeowner also stated that the area around the foundation would likely be very difficult to excavate. Additionally, the wall already had a closet right where the best spot would be.
Solution
Luckily, Fogarty's Home Services was up to the task! After identifying the best space to put the window, we marked the space for excavation. We used a mini excavator to dig up all of the dirt around the area. We then measured out and marked where the window would ideally go, ensuring that it was in the perfect space in the closet and for the homeowner. We then prepped and cut the foundation so that it would fit the egress window. We then framed the window and installed it. Once we finished that, we were able to install the window well around it. We finished the interior wall with Everlast™ wall panels. Simultaneously, other team members were filling in the space around the window well with dirt and ensuring the cover was on tightly. When it was finished, the homeowner loved the window! The cover was translucent, meaning that the light flowed through it, but nobody could see into the window well. We were proud to be able to make their home safer.
