Click on a photo to enlarge.
Fogarty's Home Services was contacted by this homeowner as she was experiencing a high level of condensation in her attic. This was causing her ceiling to stain and she had restless nights from trying to catch all the excess moisture into a bucket. Fogarty's home Services discovered that the homeowner's attic scuttle hole was leaky and uninsulated, causing excess moisture and a LOT of air that was leaking out. All this air leaving the top of the house was being replaced with cold outside air entering at the lower levels of her home, causing drafts, cold floors, and uncomfortable rooms that are hard to heat.
We weather-stripped the attic scuttle cover to stop air leakage. We then insulated the cover with a SilverGlo™ foam insulation panel. SilverGlo™ has graphite infused into the foam which bumps up the R value (insulation value) by 24% over standard EPS foam. In addition, it has a radiant barrier on top to reflect heat from a hot summer attic. This very satisfied customer is now the proud owner of a more comfortable, less drafty home.. Her rooms are easier to heat and she'll have lower fuel and electric bills.
Sealing and insulation of ducts directly over the existing insulation with 1" of closed cell foam insulation.
Full Attic insulation in Torrington, CT for homeowner so they can save on energy bills in the future.
This homeowner called us because she was experiencing a lot of trouble with ice damming and overall energy efficiency. This particular homeowner happened to be friends with a previous customer of ours and was referred to us when she was discussing her issues with them. Unfortunately, Ice damming is a far too common concern for many New Englander's facing our unpredictable, often brutal weather patterns.
Our Building Science Specialist was able to quickly determine that the most effective way to handle this situation was to convert the existing, inefficiently insulated, vented attic space to an energy efficient SuperAttic™. First we removed all existing old and moldy batt insulation and treated the area with our MoldX2 Cleaner™ and MoldX2 Botanical™. The area was then ready for us to install our SuperAttic™ Advanced Conversion system with SilverGlo™ EPS panels across the roof rafter and gable end to create a conditioned area.
This home is now more energy efficient, resulting in lower energy bills, regulated airflow, and even added conditioned space in the attic that is ready for finishing! No more ice dams!
These homeowners called because they were looking to have a full energy evaluation done to see where they can save money and improve energy efficiency.
Our Building Science Specialist arrived at the home and sat with the homeowners to get a good idea of their main concerns and come up with a general plan. Upon evaluation, we discovered that the attic area was filled with old, dirty, inefficient and moldy batt insulation which would need to be removed, the area thoroughly cleaned and treated with MoldX and add enough new, TruSoft blown cellulose insulation to bring the home to meet today's energy efficiency standards. We used 4" SilverGlo along the attic deck and vertical walls. Our specialist also discovered we would need to extend the existing bathroom vent fan out through the roof to further prevent moisture and mold into the attic. We also installed a David Lewis Attic Pull-Down Stair Hatch Cover to properly insulate and air seal the entrance to the attic.
Dr. Energy Saver by Eco Energy Solutions was able to completely remedy the problem and create a satisfactory, energy efficient solution to give the homeowners piece of mind and reach their ultimate goal of saving money on energy usage!