Insulation Services Before & After Photos

This homeowner in Ashford, CT was creating a studio above his garage that he could use all year round. 

We attached our Insulweb polypropylene netting to joists on the ceiling and walls, this creates a cavity for our TruSoft cellulose to be installed in. Once in place, we cut small slits in the Insulweb that we can then insert a hose into to densely pack in our Trusoft cellulose. For these dormers, we also installed our Foamax Polyiso board in the triangular wall space above the window and sealed around them to keep drafts out.

Thanks to Dr. Energy Saver by Eco Energy Solutions, this studio can stay warm in the winter and cool in the summer and is ready to be finished off with drywall if the homeowner decides to later on.

This Homeowner called us out to their home to take a look at their attic. They had the old insulation removed and now needed new insulation installed. Our Building Science Specialist arrived and evaluated the attic and gave them the best options for insulating and air sealing their attic.

When the installers arrived they cleaned and vacuumed the attic to remove all dust and debris from the previously installed old inefficient insulation. Next they air sealed the many various points where air from your home leaks up into your attic and is lost. Then We Installed our Blown-in premium TruSoft cellulose insulation, which fills all gaps and odd shaped voids.

Thanks to Dr. Energy Saver this homeowner will now have lower fuel and electric bills. a more comfortable, less drafty home. 

These homeowners called us after receiving an energy audit. The Audit turned up that they needed upgraded insulation to make the home more efficient. This home had been causing them nothing but headaches with drafty and inconsistently heated rooms, high energy bills and terrible ice dams. It was time to make a call to the DR!

We sent one of our Building Science Specialists out to meet with these homeowners and discuss a solution that would help put their minds at ease and save them money. We would start by removing and disposing all old, dirty insulation and prepping for the installation of fresh, new insulation. Next we air seal all penetrations with expanding polyurethane foam and treat the affected areas with MoldX2™ Cleaner and Botanical. Next we insulate the attic floor with TruSoft™ blown-in Cellulose and also air seal and insulate the Scuttle Cover with SilverGlo™ Insulation Board. Next we move to the basement where we air seal and insulate the rim joist with Closed-Cell Spray Foam. The last step is to insulate the cantilevered floor between stories by dense packing TruSoft™ Cellulose in through the soffits. This home is now completely "Buttoned-Up" and ready to provide energy efficiency at it's best, reduce ice dams and save lots of money on future energy bills!

This homeowner called us because he was having a problem with air being distributed throughout the home. Part of the home were either way too hot or way too cold and dusty too. They requested we come to evaluate the situation.

Our Building Science Specialist was able to determine through careful inspection of the duct system in the attic, the existing insulation around the duct work was inefficient and leaking air in several different areas. This attic was also full of old, ineffective fiberglass insulation. The Solution was easy...Duct Encapsulation and new insulation. We started by Installing our Tite 'N' True™ Foam Duct Encapsulation System in which we seal and insulate right over the existing insulation with 1" of closed cell foam insulation,  creating an air tight seal. We also installed a David Lewis™ Stair Hatch Cover. We then cleaned out all of the old, fiberglass insulation, air sealed all penetrations, sealed around can lights and blew in TruSoft™ Cellulose Insulation, burying the ducts, which with further insure that the air you use to heat/cool will be delivered to your rooms without loss along the way.

This homeowner called us because he recently moved his Father into the Finished Room Over the Garage (or F.R.O.G.) and his Father was complaining that the room was too cold. When he called our Appointment Center we knew exactly what he was talking about and agreed to send a Building Science Specialist right away.

Upon careful evaluation, our Building Science Specialist was able to confirm that the issue is that the Finished Room Over the Garage (or F.R.O.G.) was not insulated at all. Of course this room was cold! We air sealed & insulated the garage ceiling with TruSoft™ Cellulose. We then installed a SuperKneeWall™ Insulation System with SilverGlo™ and TruSoft™ Cellulose Insulation. Now the room is warm & ready for dad!