Windows & Doors Before & After Photos

The homeowner reached out to Fogarty's Home Services because her basement window was old, leaky, and inefficient. We removed the old window and replaced it with an Everlast™ Basement Window.  We sealed the window airtight. This happy homeowner will now experience a warmer basement, warmer floors above the basement, less drafts, and lower energy costs. 

The homeowner called Fogarty's Home Services concerned about the floors above the basement door being cold. We found that the existing door was old and drafty. We replaced the basement door with a steel-insulated basement door. Now the floors are warmer and the basement is more comfortable.

This homeowner in Wethersfield, CT called us hoping that we would be able to replace her windows. They were old and inefficient, and they just needed replacement. Some rooms are more drafty on windy days because older, poorly insulated window assemblies get loose over time. Some rooms are also drafty on cold days, even if there isn’t any wind, because of a convective loops. Convective loops occur when the air the homeowner pays to heat their home rises. Heat moves from more to less. When this warm air hits relatively colder surfaces, like the ceiling and walls, it loses its heat it and falls. This creates a constant looping circulation pattern that they feel as a draft. Older windows that are poorly installed and have poor insulation take even more heat from the air around the windows, which accelerates the looping air and makes the room feel even more drafty. Results: Cold and drafty rooms in the winter, high heating bills.

We were able to help this customer by utilizing our Sunrise double-hung replacement windows. The airtight design and construction of the Sunrise window provides the lowest air infiltration rates in the industry. Sunrise windows have vinyl welded frames and sashes. They are not screwed together so there is no room for air to leak through. The windows are made with triple weather strip barrier, 50% more than other windows. And the weather strips are made of Mylar that is denser and more resilient to temperature changes than competitive materials. Sunrise windows are made to tighter sash mechanism tolerances, and their manufacturing equipment is continually calibrated for consistent product quality. For additional infiltration resistance, each Dr. Energy Saver window built by Sunrise is wrapped with ¼” open cell polyurethane foam to insulate the space between the window and the home’s frame. This extra insulation helps to stop drafts and heat loss. Results: Warmer and less drafty rooms in the winter, lower heating and cooling bills.

This homeowner in Westfield, MA called us hoping that she would be able to get some help with her insulation. When we came out to the home, we noted that her basement did not have an insulated exterior door. Steps from the basement to the outdoors are convenient, but the (metal) hatch doors that cover them are completely uninsulated and leak lots of air. Cold winter air gets sucked into the home continually in winter. In summer, warm humid air enters the basement and causes condensation on cool floor, wall and duct surfaces. Results - Cold basement, cold floors on first floor, drafts, higher heating fuel costs, condensation in summer, higher electric costs for A/C.

We had the perfect solution for this customer. In this solution, proper framing is installed and a new insulated exterior door with weather stripping and locking knob is installed. Now “inside” the house is inside the door, and “outside” is outside the door, so it doesn’t matter that the hatch door is uninsulated and leaks air. Result - warmer basement and floors over the basement, drier basement in summer, lower fuel and electric costs, less drafts, house easier to heat, more security.

This homeowner in Windsor Locks, CT called us hoping that we would be able to replace her bulkhead door. The bulkhead door was rusting and rotting, and they were interested in getting it replaced. 

Luckily, Fogarty's Home Services was able to help this homeowner. We were able to install a beautiful new bulkhead door that was the correct size for the pre-existing concrete. We caulked around the edges and installed flashing behind the door to ensure a tight fit.  Combining this with our other solutions ensures that this homeowner will have a safe, warm, and dry basement for years to come!